Laser Water Slide Decal Paper
We offer a wide selection of color laser-printable media for your desktop publishing needs.
Make clear decals using this paper and your home color laser printer.
With our laser decal paper there is no need to seal the toner to the page with an acrylic spray, as with ink jet decal paper.
Laser water decal paper made in USA
Adding a product to your cart will take you to our ecommerce website www.texascraft.com
 COLOR LASER WATER SLIDE DECAL PAPER.
 |
| Decal paper/media: | Color Laser Water Slide Decal Paper |
| Available size: | 8.5" X 11" |
| Compatible with: | Most Newer Color Laser Compatible with: |
| Color: | Clear |
| Media/Film thickness: | Film .0015" .0012mm +/- .0002mm |
| Type of adhesive: | Water-based Gelatin |
| Outdoor Life: | N/A |
| Instructions: | Included (Click Laser water decal paper PDF Document) |
| Additional supplies needed: | Decal Squeegee and Mounting Fluid Recommended |
| Note: | Indoor Use Only |
|
|
Laser Water-Slide Decal Paper (Sample Sheet)
1 sheet 8.5" X 11"
Item# PAS48511S1S
|
|
Laser Water-Slide Decal Paper
10 sheets 8.5" X 11"
Item# PAS48511G
|
|
Laser Water-Slide Decal Paper
100 sheets 8.5" X 11"
Item# PAS48511KH
|
To make and use water-slide decal paper:
***
Detailed Instructions Included with all of our Decal Papers.
This is meant to be a general guide to using laser decal paper.
Detailed instructions on how to use the decal paper you order will be included with your purchase.
- Insert one sheet of laser decal paper into your laser printers bypass tray (if available), print on the glossy side of the decal paper.
- Cut your decals from the sheet, leaving 1/4" of free space around the edge of the decal.
- Place your decal into a bowl of warm water, let it soak for one to three minutes.
- Remove the decal from the bowl and slide it from the paper backing and onto your substrate.
Suitable to make decorative decals on wax candles, marble, slate, porcelain, ceramic, r/c model planes, scale models.
|
|